原料準備：需要準備玉米淀粉作為主要原料。通常使用玉米粉或玉米漿來提取淀粉。

Raw material preparation: Firstly, corn starch needs to be prepared as the main raw material. Corn flour or corn syrup is usually used to extract starch.

淀粉提?。簩⒂衩追刍蛴衩诐{與水混合并進行攪拌，以使淀粉與其他組分分離。隨后，通過過濾和離心等步驟將淀粉從混合物中提取出來。

Starch extraction: corn flour or corn syrup is mixed with water and stirred to separate starch from other components. Subsequently, the starch was extracted from the mixture through steps such as filtration and centrifugation.

淀粉處理：將提取得到的淀粉進行洗滌和精煉，以去除雜質和其他不需要的物質。這樣可以獲得純凈的玉米淀粉。

Starch treatment: Wash and refine the extracted starch to remove impurities and other unnecessary substances. This can obtain pure corn starch.

顆粒制備：將純凈的玉米淀粉與一定比例的水混合，制成淀粉漿糊。然后，將淀粉漿糊通過噴霧干燥或壓片成顆粒狀。

Granular preparation: Mix pure corn starch with a certain proportion of water to make a starch paste. Then, the starch paste is dried by spray or pressed into granules.

成型與烘干：將顆粒狀的玉米淀粉與一定比例的熱水混合，形成可塑性較好的淀粉糊。然后，使用專用的模具或成型機將淀粉糊成型為餐具的形狀，如碗、盤子、筷子等。成型后的餐具需要進行烘干，以去除多余的水分，增強餐具的強度。

Forming and drying: Mix granular corn starch with a certain proportion of hot water to form a starch paste with good plasticity. Then, use a dedicated mold or molding machine to shape the starch paste into the shape of tableware, such as bowls, plates, chopsticks, etc. The formed tableware needs to be dried to remove excess moisture and enhance its strength.

后續處理：經過初步成型和烘干后，餐具可以進行進一步的處理，如修整邊緣、拋光表面等，以提高外觀和質量。

Subsequent processing: After preliminary molding and drying, the tableware can undergo further processing, such as trimming edges, polishing surfaces, etc., to improve appearance and quality.

包裝和質檢：，將生產好的一次性玉米淀粉餐具進行包裝，并進行質量檢查。確保餐具符合衛生標準和相關的質量要求。

Packaging and quality inspection: Finally, the produced disposable corn starch tableware will be packaged and subjected to quality inspection. Ensure that tableware meets hygiene standards and relevant quality requirements.

值得注意的是，具體的生產過程可能因不同廠家和產品而有所差異。上述步驟僅為一般性描述，實際生產中可能還涉及其他環節和技術細節。

It is worth noting that the specific production process may vary depending on different manufacturers and products. The above steps are only general descriptions and may involve other links and technical details in actual production.